• For blocking the flow of liquids and gases
• Long-term working temperature range -60℃~+250℃
• Thread：：1/4-28UNF、10-32UNF
• REACH and RoHS Certified ,Biocompatibility reports available

• Can be used with Can be used with 1/2-20 UNF male fittings or equipment
• Long-term working temperature range -60°C~+250°C
• Suitable for standard 1/4-28UNF flat bottom threaded fittings or 5/16-24UNF flat bottom threaded fittings
• REACH and RoHS Certified ,Biocompatibility reports available

• Temperature：-40℃ to 82℃

• Main body: POM

• Finger lock button: POM

• Valve spring: 316 stainless steel

• Sealing ring: EPDM

• Temperature：-40℃ to 82℃

• Main body: POM

• Finger lock button: 304 stainless steel

• Valve spring: 316 stainless steel

• Sealing ring: EPDM

• Characterized by single hand connection and integral end,

• more convenient to use than ball sleeve design

• Material: POM, SUS316, EPDM

• Tubing ID: 1/8 "to 1/4" (3.2mm to 6.4mm)

• Rotary design, preferred as an alternative to Luer Adapter

• Material: POM, SUS316, EPDM

• Tubing ID: 3.0mm to 1/8 "(3.2mm)

• Quick Connect & Disconnect Fittings | Coupling is a fast, rotating connector with a compact structure and high flow rate. Its special design can serve as a preferred alternative to the Luer Adapter. Multiple types with a wide range of applications, Runze looking forward to your choice!

• The opening and closing parts rely on the medium flow and force to open or close themselves to prevent the backflow of the medium valve,
  mainly used for one-way flow of the medium on the tube, allowing the medium to flow in one direction only, to prevent reverse flow
• Coned check valve, spring check valve and diaphragm check valve for your choice
• Plug-in hose connectors for easy and convenient application.
• REACH and ROHS Certified ,Biocompatibility reports available.

• Size, normally 500ml big volume syringe; Custom injectors 50ML\100ML syringe. High borosilicate glass body, 304 stainless steel push rod, Polytetrafluoro piston. High precision, corrosion resistant, maximum pressure 0.68Mpa. Standard 1/4-28UNF thread, tight and well sealed.
• Material: SST, POM ,PEEK.
• Mounting size: can customized mounting hole according customer need. Pre-drilled mounting holes in panel. Support for custom components

• Compact size, easy mounting, space-saving, long service life
• Self-contained encoder / Solenoid valve
• No leadkage over 3 million times

• Compact size, easy mounting, space-saving, long service life
• An industrial Syringe Pump with high precision & high performance in micro-liquid transferring self-developed by Runze Fluid.
• Make step motor move in clockwise or counterclockwise by receiving instructions from the host computer. The circular motion is converted into linear motion by the trapezoidal screw to make the piston move up and down which applied in medical analysis equipment, chromatographic analyzers, food and beverages detection and analysis system, water quality on-line analyzer, petroleum detection equipment and biopharmaceutical extraction devices

• Compact size, easy mounting, space-saving, long service life
• Industrial syringe pump with high precision in micro-liquid transferring and high performance.
• Wetted material borosilicate glass and PTFE, corrosion resistance, high temperature resistance, biocompatible and suitable for a variety of special media.
• Widely used in a variety of analysis equipment such as environmental analysis instruments, medical analysis instruments, non-standard sampling facilities in high-precision, etc.

• High precision continuous liquid transferring instead of peristaltic pump
• Compact size compact size, easy mounting, space-saving
• High Repeatability, long service life, maintenance-free
• Wetted material borosilicate glass and PTFE, corrosion resistance, biocompatible, non-contamintion
• NMB stepper motor, long service life, high accuracy, reliability and stability
• RS232/RS485/CAN communication driver optional

• Runze patented product, compact size, can transfer liquid as microliters with extraordinary accuracy and precision
• Equipped with Japan imported NMB step motor, KSS ball screw, OMRON optocouplers, high stability and maintenance-free
• Imported fluorine material as the wetted part, resist to corrosion & high temperature, suitable for various special media.
• Equipped with special drive control or user's self-control available
• Widely used in environmental analyzers, medical analysis equipment and other high-precision analysis instruments

• Smart SY-01C syringe is the newest member in the series of micro-syringe pumps self-developed by Runze Fluid.
• Smart SY-01C Syringe Pump is suitable for applications ranging from 0.5ml to 5ml.
• Fully programmable pump module with open framework, which handing fluids from microliters to milliters with extrodinary accuracy and precison.
• With functions in automatic pipetting, dilution and dispensing.
• Controlled by an external computer or microprocessor.

• Smart SY-06B Syringe Pump is suitable for applications ranging from 50μl to 10ml.
• Fully programmable pump module with open framework, which handing fluids from microliters to milliters with extrodinary accuracy and precison.
• A syringe pump designed for OEM precision liquid handling applications.
• Controlled by an external computer or microprocessor.
• With functions in automatic pipetting, dilution and dispensing.

• SY-03B is a micro-syringe pump with extraordinary-precision in the series of high-end products developed by Runze Fluid.
• Accommodates distribution valves and syringes in a variety of configurations. 
• Transfers liquid in high precision which can meet most users＇requirements.
• Can be used in series with multiple pumps.
• Fully programmable pump module with open framework, which handling fluids from microliters to milliliters with extraordinary accuracy and precision.
• With functions in automatic pipetting, dilution and dispensing.
• Controlled by an external computer or microprocessor.

• Smart SY-01B syringe pump is the newest member in the series of micro-syringe pumps self-developed by Runze
• Fluid, which can handling fluids from microliters to milliliters with extraordinary accuracy and precision.
• Accommodates distribution valves and syringe in a variety of configuration which can meet various users’ requirement on high-precision liquid transferring.
• Multiple pumps can be used in series.
• Excellent performance provides a guarantee and convenience for the user's project.
• CE /RoHS Certified.

• SY-03B is a micro-syringe pump with extraordinary-precision in
• the series of high-end products developed by Runze Fluid.
• Accommodates distribution valves and syringes in a variety of configurations. Transfers liquid in high precision which can meet
• most users＇requirements.
• Can be used in series with multiple pumps.
• Fully programmable pump module with open framework, which handling fluids from microliters to milliliters with extraordinary accuracy and precision.
• With functions in automatic pipetting, dilution and dispensing.
• Controlled by an external computer or microprocessor.

• Anti positive pressure 1.2Mpa amd negative pressure 0.06Mpa, current valve working status can be feedback via DC3.3-24V input voltage signals
• Plane switching structure design to ensure high dispensing stability at liquid outlet without any liquid fluctuation and pulse
• Valve body can be heated up to 80℃
• Compared to common solenoid valve, Mrv-01B valve body won’t get heated even under long time working and much longer service life than common solenoid valve

• Back and forth switching of two positions 
• RUNZE patented Sapphire valve rotor and stator, biocompatible, wear-resistance, anti-corrosion & high temperature, long service life 
• Small footprint suits limited spaces 
• Available with 6, 8, 10 ports and 1.2mm orifice High efficiency and maintenance-free stepper motor drive system via RS232/RS485/CAN 
• Low pressure injectors are available with fittings for tubing OD1.6/2.0/2.5/3.0/3.175/3.2mm

• Back and forth switching of two positions 
• RUNZE patented Sapphire valve rotor and stator, biocompatible, wear-resistance, anti-corrosion & high temperature, long service life 
• Small footprint suits limited spaces 
• Available with 6, 8, 10 ports and 1.2mm orifice High efficiency and maintenance-free stepper motor drive system via RS232/RS485/CAN 
• Low pressure injectors are available with fittings for tubing OD1.6/2.0/2.5/3.0/3.175/3.2mm

• Back and forth switching of two positions 
• RUNZE patented Sapphire valve rotor and stator, biocompatible, wear-resistance, anti-corrosion & high temperature, long service life 
• Small footprint suits limited spaces 
• Available with 6, 8, 10 ports and 1.2mm orifice High efficiency and maintenance-free stepper motor drive system via RS232/RS485/CAN 
• Low pressure injectors are available with fittings for tubing OD1.6/2.0/2.5/3.0/3.175/3.2mm

• Support a variety of flow path collocation which meets the

  needs of different customers.

• Runze patented product, sapphire valve rotor and stator, which
  resist to corrosion, high-pressure, high-temperature and high
  wear resistance, biocompatible and suitable for a variety of
  special media.

• Supports multiple communication: RS232/RS485/CAN bus
  High efficiency and maintenance-free.

• Small footprint suits limited spaces.

• Widely used in environmental analysis instruments, laboratory
  analyzers, medical analysis equipment, and chromatographic
  analyzers, etc.

• CE Certified.

• Support a variety of flow path collocation which meets the

  needs of different customers.

• Runze patented product, sapphire valve rotor and stator, which
  resist to corrosion, high-pressure, high-temperature and high
  wear resistance, biocompatible and suitable for a variety of
  special media.

• Supports multiple communication: RS232/RS485/CAN bus
  High efficiency and maintenance-free.

• Small footprint suits limited spaces.

• Widely used in environmental analysis instruments, laboratory
  analyzers, medical analysis equipment, and chromatographic
  analyzers, etc.

• CE Certified.

• Runze patented product, sapphire valve rotor and stator, which resist to corrosion, high-pressure, high-temperature and high wear resistance, biocompatible and suitable for a variety of special media.
• Much smaller size, beneficial to miniaturization of instruments and equipment 
• Support various communication: RS232/RS485/CAN bus 
• High efficiency and maintenance-free 
• Widely used in environmental analyzers, medical analysis equipment and other high-precision analysis instruments

• Excellent mechanical strength, autoclavable, stretchable, non-to xic,
• nonhemolytic
• Continuous operating temperature: -60°C to + 135°C
• Hardness: 64 A
• Compatible with most CIP solutions and SIP
• Breathability: 80

(for nitrogen test, the higher the value, the better the tube breathability, and vice versa.)

• UV resistance: A
• Ozone resistance: B
• Resistance to acids and alkalis: average
• Pump tube service life: 1000 hours

(this value is provided by Saint-Gobain and is for reference only)*

• Certification: USP Class VI, FDA, NSF, ISO 10993
• ROHS Certified

Test conditions for pump tube service life : 17 tubes (6.4*9.6*1.6), at room temperature 23 degrees, with U.S. MasterFlex peristaltic pump and 3 roller Easy-Load pump head, at 600rpm, displacement back pressure: 0psi, media: water, continuous uninterrupted operation until the pump tube cracks ( the data is provided by Saint-Gobain, for  reference only

• A translucent medical/food grade tubing which is odourless, non- toxic,

  Autoclavable, stretchable 

• Continuous operating temperature -50°C to +200°C

• Hardness: 55 A

• Meets FDA standard, high sterility

• Anti-thermal oxidation, ozone Aging, light aging and weather aging

• Platinum cured for reduced residual levels of siloxanes and other volatiles

• Reduced spallation than rubber tube

• Brand: RUNZE
• Colour: PEEK natural
• Operating temperature: maximum CUT 100°C
• Product hardness : 90 AS
• Applications: bearing, piston, syringe pump, switching valve, etc.
• Features :

  1. 1.6mm OD

  2. Biocompatible, inert and easy to cut

  3. Ideal for high pressure use

  4. PEEK does not react chemically with most solvents and can be used to

  replace stainless steel tubing in most liquid analysis systems.

  5. The very smooth inner surface of PEEK tubing generates less turbulence

  than metals of similar size, which helps to improve the resolution of sample

  bands with minimal permeability of PEEK.

• Good optical clarity (96% UV transmission)
• Continuous operating temperature: FEP： -51~50℃ / PTFE: -100~150°C

  (Note: The above data were measured at room temperature 20°C, at atmospheric pressure, and the test fluid was a neutral liquid.)

• Very smooth internal surfaces

• Reduced gas diffusion

• Excellent chemical resistance

• Ideal for thermoforming

• Tight dimensional tolerances

• Biocompatible

• FDA & USP Class VI compliant

• Gamma & ETO sterilizable

• ROHS Certified

• Good optical clarity (96% UV transmission)
• Continuous operating temperature: FEP： -51~50℃ / PTFE: -100~150°C

  (Note: The above data were measured at room temperature 20°C, at atmospheric

  pressure, and the test fluid was a neutral liquid.)

• Very smooth internal surfaces

• Reduced gas diffusion

• Excellent chemical resistance

• Ideal for thermoforming

• Tight dimensional tolerances

• Biocompatible

• FDA & USP Class VI compliant

• Gamma & ETO sterilizable

• ROHS Certified

• Time-saving and high efficiency.
• Labor saving, especially for the narrow space installation.
• Prevent leakage due to untightened fittings.
• Prevent the tube from falling off due to excessive torque.

• Tight fastening and highly efficient
• Stainless steel material, an-corrosion and wear resistance
• Adapter to a variety of Runze plastic fittings
• Labor saving, especially for the narrow space installation

• Designed to divide or gather two fluids together; ideal for pre-assembled tubing

• connection geometry reduces turbulence, reduces baseline noise, increases sensitivity, and improves analysis results

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• Designed to pass through the equipment housing and connect the internal tubing to the outside

• Through-panel union with male thread M10*1, with PPS nut and PP anti-rotation clip to tighten the fittings , installation requires advance drilling of the panel; multi-color anti-rotation clip is for easy distinguishments of the flow path

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• Connecting fittings with the same or different threads together with rigid tube connection system, connection without leakage can be achieved

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• Designed to divide or gather two fluids together; ideal for pre-assembled tubing

• Y-connection geometry reduces turbulence, reduces baseline noise, increases sensitivity, and improves analysis results

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• Designed to adapt luer adapters to 10-32 UNF or 1/4-28 UNF threaded ports

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

•  REACH and ROHS Certified ,Biocompatibility reports available.

• Designed to divide or gather two fluids together; ideal for pre-assembled tubing 

• Effective elimination of loose fittings in the tube caused by twisting, can be tighten even when vibrating.

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• Connecting fittings with the same or different threads together with rigid
  tube connection system, connection without leakage can be achieved

• Long-term working temperature range -100℃~+250℃

• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom
  threaded fittings

• REACH and ROHS Certified ,Biocompatibility reports available.

• A traditional flat-bottomed fitting. By deforming the bottom of the tube, the bottom of the tube then compressed to form an airtight rigid tube connection system.

• No change in tube diameter, no effect on flow rate, more stable flow rate

• Can be disassembled repeatedly without affecting its sealing

• Long-term working temperature range -80°C~+220°C

• Used for standard rigid tubing OD 1.6mm, easy and fast installation.

• Thread： 6-40UNF

• REACH and ROHS Certified ,Biocompatibility reports available.

• Two-piece design, economical and practical, only need to replace the flangeless nut

• Continuous operating temperature: -100°C~+250°C

• 10-32UNF threaded coned head for HPLC system application

• Suitable for 1.6 mm OD PEEK/PTFE/ETFE/FEP and other semi-rigid tubes

• REACH and ROHS Certified ,Biocompatibility reports available.

• Continuous operating temperature: -100°C~+250°C
• Original one-piece hand tightening fittings
• 10-32 threaded coned head for HPLC system application
• Suitable for 1.6 mm OD PEEK/PTFE/ETFE/FEP and other semi-rigid tubes

•  REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.

  Simply slip the nut and ferrule on the tube, screwing them into the tube. Need to use with ETFE ferrule.

• CUT (Continuous Use Temperature): -80℃~+220℃

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.

• Thread: 1/4-28UNF，M6

•  REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.

  Simply slip the nut and ferrule on the tube, screwing them into the tube.

• Need to use with ETFE ferrule.

•  CUT (Continuous Use Temperature): -80℃~+220℃.

• Used for standard rigid tubing OD 4.8/6.4 mm, easy and fast installation.

• Thread: 5/16-24UNF、1/2-20UNF.

• REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.

  Simply slide the nut and ferrule on the tube, screwing them into the tube. Need to use with ETFE ferrule.

• With stainless steel sleeve, the rigid pipe does not follow the rotation during screwing flangeless nut. Effective elimination of loose fittings in the tube caused by twisting, can be tighten even when vibrating.

• High pressure fittings, ideal for pre-assembled tubing and where disconnections are often required

• Long-term working temperature range -80°C~+220°C

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.

•  Thread：1/4-28UNF，M6

• REACH and ROHS Certified ,Biocompatibility reports available.

• A tr ad iti on al fla t-b o tto m ed fit tin g. By d ef orm i ng th e b o tto m of the tube,

  the bottom of the tube then compressed to form an airtight rigid tube connection system.

• No change in tube diameter, no effect on flow rate, more stable flow rate

• Can be disassembled repeatedly without affecting its sealing.

• Long-term working temperature range -50°C~+150°C.

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.

• Thread：1/4-28UNF，M6.

• REACH and ROHS Certified ,Biocompatibility reports available.

• A tr ad iti on al fla t-b o tto m ed fit tin g. By d ef orm i ng th e b o tto m of the tube,

  the bottom of the tube then compressed to form an airtight rigid tube connection system.

• No change in tube diameter, no effect on flow rate, more stable flow rate

•  Can be disassembled repeatedly without affecting its sealing.

• Long-term working temperature range -50°C~+150°C.

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.

• Thread：1/4-28UNF，M6.

•  REACH and ROHS Certified ,Biocompatibility reports available.

• The flangeless nut and ferrule are one to one, the rigid tubing does not follow the rotation during screwing nut, which effectively eliminates the loosening of the fitting caused by the twisting of the tube and keeps it tight even when it is vibrating.
• Standard fittings with straight threads, which are tool-free and durable.
  Simply slide the nut and ferrule on the tube, screwing them into the tube.
  The fittings need to use with ferrule.
• Resistant to chemicals and organics, including PPS, ETFE materials
• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.
• Thread：1/4-28UNF
• REACH Certified reports available.

• Anti-rotation sleeve has been added to prevent fitting from rotation.
• Designed to connect internal tubing to the outside through the equipment enclosure; the installation requires the panel to be pre-drilled
• Interchangeable internal and external threads for leak-free connection with flexible and rigid pipe connection system
• Fittings are available in PP and PTFE materials, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances; thin fine pitch nut is available in PPS and PTFE materials
• Suitable for standard 1/4-28UNF flat bottom threaded fittings
• REACH and ROHS Certified ,Biocompatibility reports available.

• Designed to connect internal tubing to the outside through the equipment enclosure; the installation requires the panel to be pre-drilled
• Interchangeable internal and external threads for leak-free connection with flexible and rigid pipe connection system 
• Fittings are available in PP and PTFE materials, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances; thin fine pitch nut is available in PPS and PTFE materials
• Suitable for standard 1/4-28UNF flat bottom threaded fittings
• REACH and ROHS Certified ,Biocompatibility reports available.

• Standard threads and curvature, no gap, no wobble and good sealing with the corresponding threads
• The PPS material has high strength, high toughness, excellent heat and chemical resistance,
• Suitable temperature range -50°C~150°C
• Thread: 1/4-28 UNF
• ROHS Certified reports available.

• Standard threads and curvature, no gap, no wobble and good sealing with the corresponding threads

• Imported raw material, non-toxic, tasteless, heat and corrosion resistant.

• PP material is widely used in biomedical, environmental protection and food industries; PTFE material is also suitable for chemical industry and other fields

• Fittings available in PP and PTFE, non-toxic, odourless, heat resistant, resistant to chemicals and organic substances

• Suitable for standard 1/4-28UNF flat bottom threaded fittings
  REACH and ROHS Certified ,Biocompatibility reports available.

• Standard threads and curvature, no gap, no wobble and good sealing with the corresponding threads

• Imported raw material, non-toxic, tasteless, heat and corrosion resistant.

• PP material is widely used in biomedical, environmental protection and food industries; PTFE material is also suitable for chemical industry and other fields

• Fittings available in PP and PTFE, non-toxic, odourless, heat resistant, resistant to chemicals and organic substances

• Suitable for standard 1/4-28UNF flat bottom threaded fittings
  REACH and ROHS Certified ,Biocompatibility reports available.

• Standard threads and curvature, no gap, no wobble and good sealing with the corresponding threads

• Imported raw material, non-toxic, tasteless, heat and corrosion resistant.

• PP material is widely used in biomedical, environmental protection and food industries; PTFE material is also suitable for chemical industry and other fields

• Fittings available in PP and PTFE, non-toxic, odourless, heat resistant, resistant to chemicals and organic substances

• Suitable for standard 1/4-28UNF flat bottom threaded fittings
  REACH and ROHS Certified ,Biocompatibility reports available.

• Pre-torque flangeless fittings offers a unique system for hand-tight fittings. As the fitting is tightened, the resistance of the cap increases until the correct torque is reached at which point the cap clicks. The user is able to hand-tighten the fittings without tools or guesswork and be confident that the fitting is properly seated, creating a secure seal without damaging the port through over-tightening. The fitting can be unscrewed and reused dozens of times.
• Resistant to chemical corrosion and various organic substances, including PTFE and PP materials.
•  Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.
• Thread：1/4-28UNF，M6
• REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.

• Simply slide the nut and ferrule on the tube, screwing them into the tube. The fittings need to use with ferrule.

• Resistant to chemicals and organics, including PP, PTFE, PPS, POM and other materials

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.

• Thread：1/4-28UNF，M6

• REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.
• Simply slide the nut and ferrule on the tube, screwing them into the tube.

• The fittings need to use with ferrule.

•  Resistant to chemicals and organics, PP

• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast
  installation.

•  Different fitting colors for easy differentiation of flow paths

• Thread：1/4-28UNF，M6

• REACH and ROHS Certified ,Biocompatibility reports available.

• For blocking the flow of liquids and gases
• Fittings available in PP and PTFE, non-toxic, odourless, heat resistant, resistant to chemicals and organic substances
• Suitable for standard 1/4-28UNF flat bottom threaded fittings
• REACH and ROHS Certified ,Biocompatibility reports available.

• Standard fittings with straight threads, which are tool-free and durable.
• Simply slide the nut and ferrule on the tube, screwing them into the tube. 
• The fittings need to use with ferrule.
• Resistant to chemicals and organics, including PP, PTFE, PPS, POM and other materials
• Used for standard rigid tubing OD 1.6/2.0/2.5/3.0/3.2mm, easy and fast installation.
• Thread：1/4-28UNF，M6
•  REACH and ROHS Certified ,Biocompatibility reports available.

• Composed of two part: barbed end and thread nut. The barbed insert spins freely from the threaded nut in order to prevent the tubing from twisting during installation
• Sealing structure: a step plane is left at the end of nut, face-to- face contact sealed by thread extrusion
• Suitable for standard 1/4-28UNF flat bottom threaded fittings
• REACH and ROHS Certified ,Biocompatibility reports available.

• For adapter between male thread and hose, for connection between hose and rigid tube.
• Fittings available in PP and PTFE, non-toxic, odourless, heat resistant to chemicals and organic substances
• Suitable for standard 1/4-28UNF flat bottom threaded fittings
•  REACH and ROHS Certified ,Biocompatibility reports available.

• Luer adapter is standardized micro-permeation-free adapters that are usually connected by male and female luer part
• Simplifies the management of liquid or gaseous medical fluids and allows multiple compatible fluids to be managed using the same tube.
• PP material, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances
• Radiation sterilisation available
• REACH and ROHS Certified ,Biocompatibility reports available.

• Luer adapter is standardized micro-permeation-free adapters that are usually connected by male and female luer part
• Simplifies the management of liquid or gaseous medical fluids and allows multiple compatible fluids to be managed using the same tube.
• PP material, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances
• Radiation sterilisation available
• REACH and ROHS Certified ,Biocompatibility reports available.

• Luer adapter is standardized micro-permeation-free adapters that are usually connected by male and female luer part
• Simplifies the management of liquid or gaseous medical fluids and allows multiple compatible fluids to be managed using the same tube.
• PP material, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances
• Radiation sterilisation available
• REACH and ROHS Certified ,Biocompatibility reports available.

• Luer adapter is standardized micro-permeation-free adapters that are usually connected by male and female luer part
• Simplifies the management of liquid or gaseous medical fluids and allows multiple compatible fluids to be managed using the same tube.
• PP material, non-toxic, odourless, heat resistant, resistant to chemical corrosion and various organic substances
• Radiation sterilisation available
• REACH and ROHS Certified ,Biocompatibility reports available.

• 마운트를 통과하여 연결하는 커넥터 형태와 볼트로 조여 고정할수 있습니다.
• Material: PP
• PP material, non-toxic, odourless, heat resistant, resistant to chemical

  corrosion and various organic substances

• Function: Flexible tube connection
• Radiation sterilisation available

• Product Name: Cross Barbed Connector
• Material: PP
• Thermal Property: 100°C long time use
• Chemical Stability: Chemicals and organicscorrosion resistance
• Others: Non-toxic and tasteless,food grade materials
• Color: Natural PP
• Function: Flexible tube connection
• Tubing ID: 0.8-8.7mm

• Barb Y 커넥터
• PP재질
• Radiation sterilisation available
• Fittings available in PP,non-toxic,odourless, heat resistant, resistant to chemicals and various organic substances

• Barb TEE connect
• PP재질
• Radiation sterilisation available
• Fittings available in PP,non-toxic,odourless, heat resistant, resistant to chemicals and various organic substances

• Barb union 엘보우 피팅 & 레듀싱 엘보우 피팅
• PP재질
• Radiation sterilisation available
• Fittings available in PP,non-toxic,odourless, heat resistant, resistant to chemicals and various organic substances

• Barb union 스트레이트 & 레듀싱 피팅
• 튜빙 내경1.0-12.7mm까지 연결 가능
• 연질튜빙 연결용 피팅
• PP재질
• Radiation sterilisation available
• Fittings available in PP,non-toxic,odourless, heat resistant, resistant to chemicals and various organic substances

• Barb to Thread 타입으로 연질 튜빙과 1/4-28UNF, M8, M10,연결용adapter
• 튜빙 내경1.6-8.7mm까지 연결 가능
• 연질튜빙과 단단한 튜빙을 연결하기 위한 커넥터
• 1/4-28 UNF male 나사산 체결 가능
• PP재질
• 1개씩 판매
• REACH and ROHS Certified ,Biocompatibility reports available.
• Radiation sterilisation available
• Fittings available in PP,non-toxic,odourless, heat resistant, resistant to chemicals and various organic substances

• Barb to Male 타입으로 연질 튜빙과 1/4-28UNF, M8, M10, M12 연결용adapter
• 튜빙 내경 0.8-8.7mm까지 연결 가능
• 연질튜빙과 단단한 튜빙을 연결하기 위한 커넥터
• 1/4-28 UNF male 나사산 체결 가능
• PP, PTFE 재질 보유
• Short / Long type 보유
• 1개씩 판매

• 스트레이트, 90도의 엘보우 타입 보유
• 튜빙 내경 1.0-4.0mm까지 연결 가능
• 압력 116psi / 0.8Mpa
• 연질튜빙과 단단한 튜빙을 연결하기 위한 커넥터
• 1/4-28 UNF Female 나사산 체결 가능

• Designed to divide or gather two fluids together; ideal for pre-assembled tubing
• Effective elimination of loose fittings in the tube caused by twisting, can be tighten even when vibrating.
• Long-term working temperature range -100℃~+250℃
• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• Connecting fittings with the same or different threads together with rigid tube connection system, connection without leakage can be achieved
• Long-term working temperature range -100℃~+250℃
• Suitable for standard 10-32UNF conical fittings or 1/4-28UNF flat bottom threaded fittings

• PP,PTFE 재질
• 1/4-28UNF Female Thread
• M12 Male Thread
• 사용 OD(mm) : 3.2/3.175/ 3.0/  2.5/2.0/1.6

• PP,PTFE 재질
• 1/4-28UNF Female Thread(양쪽)
• 최대 압력 : 116psi / 0.8 Mpa(상온)